We change the default `--host-only-cidr` to `192.168.59.1/24` in order
to be compatible with the new default host-only networking restrictions
implemented in VirtualBox 6.1.28.

This fixes access denied errors on `minikube start` when using
VirtualBox >= 6.1.28:

```
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp
```

More details:

VirtualBox 6.1.28 introduced new restrictions on host-only networking:
https://www.virtualbox.org/wiki/Changelog-6.1#v28

Manual: https://www.virtualbox.org/manual/ch06.html#network_hostonly

> On Linux, Mac OS X and Solaris Oracle VM VirtualBox will only allow IP
> addresses in 192.68.56.0/21 range to be assigned to host-only
> adapters. For IPv6 only link-local addresses are allowed. If other
> ranges are desired, they can be enabled by creating
> /etc/vbox/networks.conf and specifying allowed ranges there. For
> example, to allow 10.0.0.0/8 and 192.168.0.0/16 IPv4 ranges as well as
> 2001::/64 range put the following lines into /etc/vbox/networks.conf:
>
>      * 10.0.0.0/8 192.168.0.0/16
>      * 2001::/64
>
> Lines starting with the hash # are ignored. Next example allows any
> addresses, effectively disabling range control:
>
>      * 0.0.0.0/0 ::/0

These new restrictions manifest in the form of the following issue on
`minikube start` due to the default `--host-only-cidr` used by the
VirtualBox driver being `192.168.99.1/24`:

```console
😄  minikube v1.23.2 on Ubuntu 18.04
✨  Using the virtualbox driver based on user configuration
👍  Starting control plane node minikube in cluster minikube
🔥  Creating virtualbox VM (CPUs=2, Memory=6000MB, Disk=20000MB) ...
🔥  Deleting "minikube" in virtualbox ...
🤦  StartHost failed, but will try again: creating host: create: creating: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet0 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp

🔥  Creating virtualbox VM (CPUs=2, Memory=6000MB, Disk=20000MB) ...
😿  Failed to start virtualbox VM. Running "minikube delete" may fix it: creating host: create: creating: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet1 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp

❌  Exiting due to GUEST_PROVISION: Failed to start host: creating host: create: creating: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet1 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp

╭───────────────────────────────────────────────────────────────────────────────────────────╮
│                                                                                           │
│    😿  If the above advice does not help, please let us know:                             │
│    👉  https://github.com/kubernetes/minikube/issues/new/choose                           │
│                                                                                           │
│    Please run `minikube logs --file=logs.txt` and attach logs.txt to the GitHub issue.    │
│                                                                                           │
╰───────────────────────────────────────────────────────────────────────────────────────────╯
```

While the above is the primary error, other errors will be reported if
the adapter already exists (this happens when the adapter was created
before updating to VirtualBox 6.1.28, on a version of VirtualBox without
the new restrictions). Some examples:

```
❌ Exiting due to IF_VBOX_NOT_VISIBLE: Failed to start host: creating host: create: creating: Error setting up host only network on machine start: The host-only adapter we just created is not visible. This is a well known VirtualBox bug. You might want to uninstall it and reinstall at least version 5.0.12 that is is supposed to fix this issue
```

```
❌  minikube is unable to connect to the VM: dial tcp 192.168.99.112:22: i/o timeout

	This is likely due to one of two reasons:

	- VPN or firewall interference
	- virtualbox network configuration issue

	Suggested workarounds:

	- Disable your local VPN or firewall software
	- Configure your local VPN or firewall to allow access to 192.168.99.112
	- Restart or reinstall virtualbox
	- Use an alternative --vm-driver
	- Use --force to override this connectivity check

❌  Exiting due to GUEST_PROVISION: Failed to validate network: dial tcp 192.168.99.112:22: i/o timeout
```

When switching to a valid CIDR, `minikube start` works as usual:

```console
😄  minikube v1.23.2 on Ubuntu 18.04
✨  Using the virtualbox driver based on user configuration
👍  Starting control plane node minikube in cluster minikube
🔥  Creating virtualbox VM (CPUs=2, Memory=6000MB, Disk=20000MB) ...
🐳  Preparing Kubernetes v1.22.2 on Docker 20.10.8 ...
    ▪ Generating certificates and keys ...
    ▪ Booting up control plane ...
    ▪ Configuring RBAC rules ...
    ▪ Using image gcr.io/k8s-minikube/storage-provisioner:v5
🔎  Verifying Kubernetes components...
🌟  Enabled addons: storage-provisioner, default-storageclass
🏄  Done! kubectl is now configured to use "minikube" cluster and "default" namespace by default
```

Signed-off-by: Nicolas Busseneau <[email protected]>